“Agape Mu”
1977 Ericson 36C
Specifications
Description
This vessel has had almost everything done to update it for cruising with confidence. Owner spent over $40,000 to get it to this point.
It is ready to have the electric motor hooked up (needs batteries) or a new diesel installed. The owner planned on taking the boat to Hawaii but had a life changing event and needs to sell the vessel. Similar vessel in this condition is worth much more than sales price here so it is definitely a good buy. Lots of upgrades and maintenance as listed below. Ready for a new owner to make her ready to get underway.
Repair Log
5-8-2020 - Haul Out - Survey and Rigging Survey
5-8-2020 - Engine Maintenance
5-27-2020 - Engine Maintenance (Hoses replaced, filters replaced, new starter ignition, repainted.
5-27-2020 - Chain Plates Re-bedded w/ Dophinite. Navigation Lights replaced, Spreader Lights Cleaned, Anchor Light Replaced, Steaming Light Replaced.
5-27-2020 - Interior Wood cleaned and oiled. Interior Vinyl Cleaned. Cushions steam cleaned.
5-27-2020 - New Fire Extinguishers x1 B I and x2 B II. (2) New Fire / Carbon Monoxide Alarms. New Bilge Pump.
5-30-2020 - x3 Coats of Awl Spar for teak trim after light sanding.
6-12-2020 - Haul Out - All Through Hulls inspected and replaced. New Ball Valves, Backing Plates replaced, Hoses replaced. Large Blisters repaired. Bottom of boat repainted, Zinc Replaced.
6-19-2020 - New Sea Strainer, Pressure water pump mounted, New Shore Power Inlet, Galvanic Isolator + ELCI Panel. New Buss Bars, New Wire from Hull Inlet to Panel. Protective cover for AC Panel. Ground Buss Bars. Overcurrent Protection on house battery, cables from battery to charger replaced. Secured loose wires, cleaned corrosion, replaced wiring and connection at AC / DC Panels.
7-4-2020 - Fixed leak on head sink. Replaced head with new Jabsco. 6' of high quality waste hose to Y Valve. Corrected Issue with Roller Furler. Adjusted Genoa Height.
7-6-2020 - Installed New VHF, new Coax Cable in Mast, installed VHF Command Mic at Helm.
9-2-2020 - New Main Sail fabricated and installed by Harry at H2O sails.
1-8-2021 - New Dock Lines, Fenders, Dock Step.
4-7-2021 - Diesel Engine Removed.
4-21-2021 - Diesel Tank Removed.
4-28-2021 Engine Bay cleanup.
9-01-2021 – Remove Leaking Water Heater, Cap Pipes
12-23-2021 – Purchasing new Bilge Materials – Find Coupling that will Fit New Engine – Fitting Wood to Size
2-23-22 –Parts sizing for packing box, shaft, etc. Shaft coupling removal, shaft cleaning, cutlass bearing inspected, prop shaft tube stuffed w/ wax to prevent leakage, cleaned shaft, removed old packing box, installed new packing box, installed teflon/flax packing
4-5-2022 Paint Engine Bay and Prep for Engine Installation
5-21-22 Bilge Pump System Refit and Service – New Hoses, Clamps, Sealant Tape, Leak Testing
6-13-2022 Install Electric Motor and Align
8-24-2022 Mock up and Design Lithium Battery Install
Recurring Maintenance
Zincs replaced every season.
Hull bottom cleaned every 6 weeks.
Replace Steaming Light fixture and install
Aqua Signal – Series #40 Bulbs in Anchor and Tri Color Lights
Remove Chainplate Cover Rebed with Dolphinite
Aikane Marine [6/15/2020]
Replaced starboard thru hull, rebed port and center thru hull.
New ball valves, cockpit drains and connections on all 3 cockpit thru hulls.
Installed new sea strainer on engine raw water thu hull. Rebuilt galley sinks, from sink drains to thru hulls. All new connections, hoses, ball valve, and thru hull, hoses, ball valve and anti-siphon on head intake. New thru hull, ball valve, hose to selector valve and anti-siphon on head overboard discharge. New hose on head sink. Installed new valves in fresh water system to tanks, mounted pressure water pump. New hoses and drain for deck drains. Installed new shore power hull inlet, galvanic isolator and ELCI panel. All new wire from hull inlet to panel. Made protective cover for AC panel. Replaced all ground buss bars. Installed Over Current Protection on house battery, cables from battery charger.
8/3/2020] Main Sail
New Mainsail
135% Genoa,7.8oz Challenge Sailcloth, X Cut, Radial Patches, Foam Luff, Foil
Tell Tails, Sail Bag
[2/12/2021] QT 20 Engine
QT 20 Engine
Delta Q Charger
Additional Materials on the Boat for Battery Upgrade
Victron Energy Cerbo GX, Panels and System Monitoring
Victron Energy GX touch 50
Victron Energy Smart Battery Monitor w/ Bluetooth
Victron Energy Phoenix Inverter 48/1200
Victron Energy Orion-Tr DC/DC Converter
Victron Energy SmartSolar MPPT 150V 35 amp 12/24/36/48-Volt Solar Charge Controller (Bluetooth)
Victron Energy SmartShunt 500A/50mV
Global Sat BU-353-S4 (GPS)
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Owner's personal items excluded. Exclusions include, however are not limited to, Seller's personal possessions, loose items, binoculars, handheld radio(s), charts, tools, fishing equipment, spare parts, clothing and foul weather gear, galley equipment, linens/bedding and any items not specifically listed on equipment list specifications sheet.
