1978 Ericson 35 Sloop

The Bruce King designed Ericson 35 is a good-looking boat. She has a very strong sheerline, powerful forward but not overly springy aft. The stern is hollow in profile, and the stem profile is just convex enough to look like a straight line.

This particular Ericson has many updates on the rigging and deck that were completed in 2018. Standing Rigging was replaced and deck was redone along with other expenses that totaled $17,000 at the world famous San Francisco boat works.

The following work was completed by San Francisco boat Works in 2018:

PREP & PAINT BOTTOM (TWO COATS 7 SPAR PRO BLUES

CLEAN PROP & SHAFT (NO ZINCS)

DECOMMISSION & UNSTEP MAST, REMOVE STANDING RIGGING & REPLACE RIG MAST WITH NEW STANDING RIGGING, STEP MAST & STATIC TUNE MAST HAS A PREEXISTING BEND ON STARBOARD & HAS BEEN REPAIR WELDED AT PARTNER AREA), PIN & TAPE TURN BUCKLES &

RECOMMISSION RIG

REMOVE & REINSTALL STARBOARD LIFELINE STANCHION WITH BACKING PLATE, WELD CRACK IN STANCHION BASE REMOVE & REPLACE OLD LIFELINE COATED WIRE WITH 1×19

STAINLESS WIRE

RENEW GALLEY SINK DRAIN HOSE & HOSE

CLAMPS

FREE UP 2X FROZEN THRU HULL VALVES TO COCKPIT

DRAINS & GALLEY SINK

CAP THE OPEN ENDED MANUAL BILGE PUMP DISCHARGE

HOSE & REPLACE HOSE CLAMPS

REPLACE PLASTIC ELECTRIC BILGE PUMP DISCHARGE THRU

HULL FITTING & REPLACE BILGE PUMP HOSE

SECURELY MOUNT PROPANE BOTTLE TO RAILING &

REROUTE PROPANE HOSES & SOLENOID

TRACE WIRING ATTACHED TO THE BYPASSED FUSE BLOCK IN ENGINE ROOM & PROPERLY CONNECT WIRE TO FUSES IN BLOCK AS INTENDED & INSTALL PROPER FUSE PROTECTION IN POSITIVE BATTERY CHARGER WIRES AT THE CONNECTION TO BATTERY TERMINALS

REPLACE C INLET PLUG & SHORE CABLE

REPLACE BINNACLE COMPASS

REPLACE & PROPERLY MOUNT PORTABLE FIRE

EXTINGUISHERS

MOUNT GARBAGE DISPOSAL PLACARD

REPLACE FROZEN TOILET DISCHARGE Y-VALVE & SECURE IT

V-berth stateroom forward with enclosed head to port, hanging locker to starboard.

Main salon has U-shaped seating to port and settee opposite,  galley is aft to starboard with navigation station to port at forward end of single quarter berth. 

Interior built with many fiberglass liner parts which make for easy maintenance and lasting value.  Cabin roof is of liner construction and features large opening hatch.

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Owner's personal items excluded.  Exclusions include, however are not limited to, Seller's personal possessions, loose items, binoculars, handheld radio(s), charts, tools, fishing equipment, spare parts, clothing and foul weather gear, galley equipment, linens/bedding and any items not specifically listed on equipment list specifications sheet.