1986 Liberty Cutter 49

MAJOR PRICE REDUCTION - MOTIVATED SELLER

The Liberty 49 is an elegant long-distance cruising yacht designed by Stan C. Huntingford and built in the tradition of her predecessor, the Liberty 458. It is a yacht whose well thought out and liveable accommodation plan has received the plaudits of all who have owned one. She has graceful lines, unsurpassed structural integrity and exceptional directional stability. This combination, along with her spacious and well-designed interior make her an ideal cruiser and live-aboard. The attention to detail and the superb craftsmanship make "ENCHANTRESS" (Hull # 2 of 13 built) a delight to own and combined with her performance capabilities, a pleasure to sail.

The creative utilization of space allows for exceptional comfort down below. For instance, the Liberty 49 has 6'10" headroom providing an air of spaciousness. Below deck in the forepeak is an enclosed head compartment with access to the forward most chainlocker. Next aft is guest stateroom with double berth to starboard. An office is aft to port. The salon is next aft with a L-shaped settee with dining table to starboard followed by the L-shaped galley. The centered companionway ladder is off the galley and leads up to the center cockpit. To port in the salon is a stright settee followed by a Nav station in the port passageway that leads to the aft owners stateroom. The aft cabin is fitted with a extra large berth and enclosed head compartment.

• master stateroom aft with center line king.
• private head with shower & tub
• full size vanity with large mirror
• forward stateroom "Den" with double settee
• full size desk
• private head & shower
• main salon sleeps 2 on two settees

Teak and holly cabin-sole, interior bulkheads covered with solid teak vertical staving, all ceilings covered with solid horizontal teak battens, teak salon table  and chart table, hand rubbed polyurethane varnish. Marble counter tops in galley and WCs

Large drawers and storage lockers with ample counter space

• top & front-loading Technautics 6 cubic ft refrigerator/freezer with 12V marine compresser
• 4-burner propane oven 
• Sanyo microwave

The navigation station is located to the left of the companionway. The large work surface easily holds large charts

• Icom ICM80 VHF. cockpit ICM502  I
• IKenwood SSB TKM 707 w/antenna coupler
• Vigil rador
• 128 GPS with chartplotter x2
• Alfa Marine  autopilot
• Datamarine wind, depth, speed instruments
• Furuno weatherfax
• hydraulic steering system

• 120 volt a/c
• a/c panel and sub-panels engraved
• double pole main & single pole service circut breakers
• reverse polarity indicator
• dual 30 amp shore power: telephone/TV inlet
• rotary x3 battery switch
• 12 volt alternator - 180 amp
• 6 volt x 4 house batteries
• group 27 12 volt x 3 engine start batteries 

All required blocks, U.S. stainless steel 1X19 standing rigging, Dacron running rigging, triple halyard stoppers, triple deck organizers, aluminium spars

• painted aluminum mast & boom
• keel stepped
• folding mast steps
• boom vang
• dacron main sail
• dacron staysail
• dacron furling genoa
• Yankee furler
• self tailing winches; Lewmar ST: 43x2, 46x2, 55x2-cockpit, Lewmar ST40x2- mast
• standing rigging; 1x19 SS w/swedged ends. New in 2010

Single unit hand-laminated 24 oz. woven roving alternated with 1.5 oz matt. Balsa sandwich core construction. Non-skid surface molded in on house top. Hand-laminated 24 oz woven roving alternated with 1.5 oz matt. Insulated hull. All bulkheads and floors are bonded to the hull.

• teak decks
• teak and holly cabin soles
• teak-lined lockers
• bowsprit with custom artistic figurehead
• trunk over salon, cored FRP w/molded nonskid
• bottom serviced and painted in January 2012

Engine access door from galley & chart table passageway

• Raycore fuel filter/water separator
• Borg Warner hydraulic transmission
• Instrument panel in pedestal
• hydraulic steering system
• emergency steering tiller
• 90 HP diesel engine
• 36" stainless steel destroyer wheel & pedestal guard
• 180  amp alternator
• Three bladed bronze propeller
• Racor fuel polishing system
• 12v oil changing system

• horizontal electric 12v bow anchor windlass w/gypsy & capstan
• Bruce 30kg w/100ft chain & 200ft rode
• CQR 50lb w/300ft chain (bitter ends secured w/line)
• Fortress FX85 aluminum stern anchor
• wood w/teak slat catwalk
• stainless steel bowsprit pulpit, pushpit

• 12 bronze self-draining opening ports
• 6 large fixed windows with SS exterior frames and teak interior frames
• 5 aluminum opening hatches
• 3 large and 2 small, 6 SS dorade ventilators with bug screens
• 2 x Marine Air reverse cycle air conditioniners

• Spectra watermaker 200 gal per day
  
• Fischer-Panda 8kw generator
• built in forward and aft 110v Marine Air reverse cycle air conditioning
• Hurricane diesel fired heater
• 6 gal waterheater/ engineheat and AC
• Thor combo washer/dryer
• 10 foot Caribe inflatable dinghy
• 20 hp Mercury outboard
• stern arch with dinghy davits
• 6 solar vents