1987 MacGregor

Completely renovated in 2000 including structural upgrades, installation of new parts and overall general maintenance by Nelson Boat Yard in Alameda, California. We have copies of the invoices on the work performed in our files and are summarized below under Hull and Deck.

New LeFiell cruising mast and boom. New mast step, standing rigging and running rigging. New ProFurl jib furling system. New teak and holly soles.

Raytheon RLC 80 color radar/chartplotter with repeater installed at helm station.

Pathfinder 85hp diesel engine in very clean condition, under 600 hours and professionally maintained.

New teak and holy soles installed in September 2000. Owner installed six new Alpenglow red and white lights, the red lights are great for night sailing and non disturbance of grew.

The whole of the interior is spotless.

• Equipped with:
• 1) Princess three burner propane stove with oven.
• 2) Molded built in sink with pressure water faucets (cold water only).
• 3) Manual hand pump.
• 4) Storage for dishes, utensils and dry goods.

• 1) Raytheon RLC 80 color Radar/Chartplotter installed with antenna structure in March 2001.
• 2) Raytheon 7.5 radar/chartplotter repeater installed at helm station, March 2001.
• 3) Datamarine depth sounder.
• 4) Datamarine wind speed/wind direction.
• 5) Datamarine speed log.
• 6) Pedestal mounted 5" Ritchie compass.
• 7) Standard Horizon Spectrum GX2350S VHF with seperate cockpit unit.

• 1) 12vdc electical system.
• 2) 110 vac electric system.
• 3) 110v shore power outlet with cord.
• 4) Four batteries in addition to dedicated engine battery,
• 5) Battery monitor system installed in March 2001.
• 6) Jensen Audio entertainment system with 6 CD changer installed in 2000.

• Sails:
• 1) Dacron main.
• 2) 100% Dacron working jib.
• 3) 1 1/2 .oz spinnaker.
• 4) New ProFurl headsail roller furler installed.

• Rigging:
• 1) Standing Rigging: All new standing rigging.
• 2) Mast mounted spinnaker pole.
• 3) Reaching strut.

• Running Rigging:Running rigging installed with new spinnaker rigging 2000.

  Winches:

• 1) Two Primary Lewmar #55, self tailing, two speed.
• 2) Two Secondary Lewmar #52, self tailing, two speed.
• 3) On house deck - main sheet #52 Lewmar, self tailing.
• 4) Two on house deck by companionway - traveller adjustment #40 Lewmar, self tailing.
• 5) Two on house, forward by mast #40 Lewmar, self tailing.
• 6) Two mast halyard #40 Lewmar, self tailing.

  Mast/Other:

• 1) LeFiell cruising mast and boom in 2000.
• 2) Custom mast collar.
• 3) Harken mainsail traveller system installed and relocated to top of deck house.
• 4) Mainsheet control block and rigging installed 2000.
• 5) On house deck, one double Spinlock clutch and one triple Spinlock clutch.

• SUMMARY OF NELSON BOAT YARD INVOICES:
• 1) Build and install additional floor pieces (Four floor steps, floor under nav station, floor at seat in port aft cabin, floor sections in head.
• 2) Build and install teak and holly cabin floor.
• 3) Touch up additional gelcote damage.
• 4) Install mast boot material and static tune mast.
• 5) Install haylon system.
• 6) Jib modified to fit furler.
• 7) Install stoppers for halyard.
• 8) Sheet stoppers, line, splicing, winch handles, winch handle holders, shacles etc.
• 9)Purchase and install mainsail traveller,
• 10) Replace windows and hatch board.
• 11)Install small hatch over head.
• 12) Purchase and install large hatch forward.
• 13) Purchase and install Lectrasan head.
• 14) Build and install teak salon table.
• 15) Purchase and install propane stove and related systems.
• 16) Install new chain plate supports.
• 17) Paint bottom with two coats of awlgrip black.
• 18) Buff and wax side of hull.
• 19) Replace cutlass bearing and packing gland with PSS dripless unit.
• 20) New mast parts andix new halyards.
• 21) New standing rigging.
• The above is only a partial list - complete copies of invoices in our files.

• 1) Cutlass bearing and dripless packing gland installed in 2000.
• 2) Halon Fire system installed in engine room in 2000.
• 3) Fuel sytem cutoff valve installed in 2000.
• 4) Seperate dedicated battery to engine installed March 2001.
• 5) Three blade prop.

• Safety Gear:
• 1) Stainless steel bow pulpit.
• 2) Stainless steel stern pulpit.
• 3) Stainless steel stanchions, double life lines.
• 4) USCG-Approved Lifesling.
• 5) Type IV horseshoe buoy.
• 6) Seasave eight man life raft.
• 7) Six safety harnesses.
• 8) ACR satellite 406 EPIRB - new March 2001.
• 9) Manual whale gusher pump.
• 10) Two electric bilge pumps.
• 11) Two Halon DC fire extinquishers in addition to Halon system in engine compartment.
• Additional Equipment/Gear:
• 1) Stainless steel deck hand rails.
• 2) Bruce bow anchor - 33 pounds.
• 3) Bosun chair.
• 4) Radar reflector.
• 5) Stainless steel pedestal mounted steering wheel and instruments.
• 6) Canvas covers for pedestal wheel, main sail and all winches.
• 7) Attached to radar mounting transom pole is a swing out stainless steel outboard bracket.